EMOD motor

Products > EMOD-Germany > EMOD motor

EMOD motor

blob.png

IP 68 stainless steel motor

TMEST  Leistung     ausgetaucht  Output kW

71/2-50    0,12

71/2-65    0,18

71/2-90    0,24

80/2-60    0,22

80/2-80    0,30

80/2-90    0,32

80/2-100  0,37

80/2-120  0,44

90/2-75    0,37

90/2-100  0,55

90/2-110  0,60

90/2-150  0,80

90/2-175  0,95

71/4-50    0,15

71/4-65    0,18

71/4-80    0,22

71/4-90    0,24

71/4-110  0,30

80/4-60    0,25

80/4-80    0,30

80/4-90    0,32

80/4-120  0,44

90/4-75    0,37

90/4-100  0,55

90/4-130  0,70

90/4-150  0,80

90/4-180  0,95


blob.png

HS-FKFOIN series


The German EMOD company specially designed HS-FKFOIN series high-speed three-phase motors for test bench applications.


The maximum external voltage of HS-FKFOIN series motors is 690V, protection grade IP23, high dynamic characteristics, extremely low moment of inertia, extremely wide field weakening area, temperature sensors are installed on the windings and bearings, the use of hybrid bearings makes the motor With low maintenance and long life, encoder can be installed, suitable for IGBT inverter drive control.



blob.png

IE4 super high efficiency motor
blob.png


Flat motor

blob.png

Three-phase special motors in flat design

Depending on their slim quadrangular design they are used in

drives with small interspaces between spindles.

Especially strong design of bearings and shafts allows rated

speeds up to 18000rpm when driven by a converter (300Hz).

The heavy-duty bearing arrangement at the drive end and the –

in comparison with the frame size – big diameter of the output

shaft allow the direct mounting of drilling chucks etc.

These high-speed motors are mostly used in special machines for

machining of plastics, wood or metals.

Mechanical design:

Degree of protection IP 54 in accordance with DIN IEC 34, part 5.

Motors are totally enclosed and surface ventilated.

Types of construction:

Motors are available in feet or feet-flange version.

They are to be fixed by using the taped holes in the motor feet.

The construction of the drive-end flange allows the mounting of

a protecting device for the tools by means of taped holes.

blob.png

blob.png


blob.png

IP23 DC motors

DC motors

Degree of protection IP 23s

DC shunt wound motors of the GMF series are internally forced

cooled, and they are especially intended to meet the high

requirements when used with thyristor current converters.

Besides, four-pole design and square sectional view ensure at

smallest size the highest possible output power; large air gaps,

widening to the pole exteriors, decrease the magnetic armature

reaction and also enable safe cooling at low noise level.

Fully laminated field and armature as well as commutating poles

ensure low heat losses and sparkless commutation.

Extensive speed-control ranges with absolute smooth running

and reversing are ensured by skewed rotors and large number of

collector peaces.

As standard the motors are equipped with overhead mounted

external blowers. Other mounting positions are available.

In dusty environments a filter at the air-inlet opening can

subsequently be provided. On request the degree of protection

IP 44 R for the connection to an external cooling system is

possible by means of special adapter flanges.

The n.d.e. end shields and shaft ends are in series provided

for various mountings of tachogenerators. Special shaft ends as

well as mounted spring-loaded brakes are deliverable, if required.

blob.png


blob.png

IP44 DC motors

DC shunt wound motors of the GKF series are specially

designed to be used with thyristor controllers.

Fully laminated field and armature as well as commutating poles

and compensating windings ensure low heat losses and sparkless

commutation.

Extensive speed-control ranges with absolute smooth running

and reversing are ensured by skewed rotors and large number

of collector segments.

Up to multiple overload torque and armature current are each

other exactly proportional.

The mounting dimensions are according to the directions of

IEC 60072. Special constructions are deliverable on request.

As standard the motors are provided with separate axial blower

and second shaft end for tachogenerators in hollow-shaft version

and B10-design. Mounted spring-loaded brake, radial blower and

special shaft ends are available.

blob.png

blob.png

Three-phase motor IP55

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

Other models, call for information


blob.png

IP23 three-phase motor

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png

blob.png


blob.png

Fully enclosed motor


blob.png

Submersible motor