EMOD电机

EMOD电机

IP 68不锈钢电机

TMEST  Leistung     ausgetaucht  Output kW

71/2-50    0,12

71/2-65    0,18

71/2-90    0,24

80/2-60    0,22

80/2-80    0,30

80/2-90    0,32

80/2-100  0,37

80/2-120  0,44

90/2-75    0,37

90/2-100  0,55

90/2-110  0,60

90/2-150  0,80

90/2-175  0,95

71/4-50    0,15

71/4-65    0,18

71/4-80    0,22

71/4-90    0,24

71/4-110  0,30

80/4-60    0,25

80/4-80    0,30

80/4-90    0,32

80/4-120  0,44

90/4-75    0,37

90/4-100  0,55

90/4-130  0,70

90/4-150  0,80

90/4-180  0,95

HS-FKFOIN系列

德国EMOD公司针对测试台应用，专门设计了HS-FKFOIN系列高速三相电动机。

HS-FKFOIN系列电动机的最大外接电压为690V，防护等级IP23，高动态特性，极低的转动惯量，极宽的弱磁区域，在绕组和轴承上安装了温度传感器，混合轴承的使用成就了电机的低维护和高寿命，可以安装编码器，适用于IGBT变频器驱动控制。

IE4超高效电机

扁平电机

Three-phase special motors in flat design

Depending on their slim quadrangular design they are used in

drives with small interspaces between spindles.

Especially strong design of bearings and shafts allows rated

speeds up to 18000rpm when driven by a converter (300Hz).

The heavy-duty bearing arrangement at the drive end and the –

in comparison with the frame size – big diameter of the output

shaft allow the direct mounting of drilling chucks etc.

These high-speed motors are mostly used in special machines for

machining of plastics, wood or metals.

Mechanical design:

Degree of protection IP 54 in accordance with DIN IEC 34, part 5.

Motors are totally enclosed and surface ventilated.

Types of construction:

Motors are available in feet or feet-flange version.

They are to be fixed by using the taped holes in the motor feet.

The construction of the drive-end flange allows the mounting of

a protecting device for the tools by means of taped holes.

IP23直流电机

DC motors

Degree of protection IP 23s

DC shunt wound motors of the GMF series are internally forced

cooled, and they are especially intended to meet the high

requirements when used with thyristor current converters.

Besides, four-pole design and square sectional view ensure at

smallest size the highest possible output power; large air gaps,

widening to the pole exteriors, decrease the magnetic armature

reaction and also enable safe cooling at low noise level.

Fully laminated field and armature as well as commutating poles

ensure low heat losses and sparkless commutation.

Extensive speed-control ranges with absolute smooth running

and reversing are ensured by skewed rotors and large number of

collector peaces.

As standard the motors are equipped with overhead mounted

external blowers. Other mounting positions are available.

In dusty environments a filter at the air-inlet opening can

subsequently be provided. On request the degree of protection

IP 44 R for the connection to an external cooling system is

possible by means of special adapter flanges.

The n.d.e. end shields and shaft ends are in series provided

for various mountings of tachogenerators. Special shaft ends as

well as mounted spring-loaded brakes are deliverable, if required.

IP44直流电机

DC shunt wound motors of the GKF series are specially

designed to be used with thyristor controllers.

Fully laminated field and armature as well as commutating poles

and compensating windings ensure low heat losses and sparkless

commutation.

Extensive speed-control ranges with absolute smooth running

and reversing are ensured by skewed rotors and large number

of collector segments.

Up to multiple overload torque and armature current are each

other exactly proportional.

The mounting dimensions are according to the directions of

IEC 60072. Special constructions are deliverable on request.

As standard the motors are provided with separate axial blower

and second shaft end for tachogenerators in hollow-shaft version

and B10-design. Mounted spring-loaded brake, radial blower and

special shaft ends are available.

三相电机IP55

其他型号，电话索要资料

IP23三相电机

全封闭电机

潜水电机